Code: SC503-02
Description: 3rd Tray Lowering Error (D694) The machine detects the lowering error of the tray lift motor for the PFU (D694) 3 times consecutively when the 3rd tray is lowered at the machine’s initialization. (The message of resetting the tray is displayed when the machine detects the error consecutively 2 times or less.)
Causes: • Tray lift motor connector disconnected • Limit sensor harness disconnected or broken • Control board defective • Paper overload • Foreign matter, such as paper scrap, is caught between the paper feed tray and the tray lift motor • Paper set fault
Remedy: • Reset the paper. • Remove the foreign matter. • Replace the tray lift motor. • Reset the connector. • Replace the harness. • Replace the limit sensor. • Replace the control board for the optional PFU (D694). • Replace the tray. • Replace the paper feed roller. • Replace the pick-up arm.