Code: SC501-01
Description: 1st Tray Lift Error The machine detects the error of the 1st tray lift motor 3 times consecutively when the 1st tray is lifted.. (The message of resetting the tray is displayed when the machine detects the error consecutively 2 times or less.)
Causes: • 1st tray limit sensor connector disconnection, malfunction or sensor's dirt. • 1st tray lift motor connector disconnection, malfunction • Foreign matter, such as paper scrap, is caught between the paper feed tray and the tray lift motor. • Paper set fault
Remedy: • Reset the paper. • Remove the foreign matter. 1st tray limit sensor, 1st tray lift motor • Check the harness. • Reset the connector. • Replacement 1st paper feed unit, 1st tray • Replacement Paper transport IOB • Replacement