Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 102-00 — Ricoh D219 MPC306ZSP GR-C2

Code: 102-00

Description: LED intensity adjustment error The peak white level cannot be in the prescribed value even though adjusting several times. This SC is detected when the machine adjusts the LED’s light intensity.
Causes: • Connection failure • Scanner carriage failure • BiCU failure • Harness failure
Remedy: 1. Check if the SC occurs by turning the power off then on. If the SC occurs again, do the following steps. Check if the SC reoccurs by cycling the power after each step. 2. Reconnect the following connectors. SBU-BiCU harness (FFC) connector SBU-LEDB harness (FFC) connector (SBU) 3. Check the white plate (Exposure glass). Replace the exposure glass, if dirty or damaged. 4. Replace the scanner carriage. 5. Replace the BiCU. 6. Replace the harness (FFC).

← Xem tất cả mã lỗi Ricoh D219 MPC306ZSP GR-C2

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie