Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 141-00 — Ricoh D219 MPC306ZSP GR-C2

Code: 141-00

Description: Black level detection error Black level is not less than the prescribed value. This SC is detected when: the scanner power is turned on and the machine returns from the energy saver mode.
Causes: • Connection failure • Scanner Carriage failure • BiCU failure • Harness failure
Remedy: 1. Check if the SC occurs by turning the power off then on. If the SC occurs again, do the following steps. Check if the SC reoccurs by cycling the power after each step. 2. Reconnect the SBU-BiCU harness (FFC) connector 3. Replace the scanner carriage. 4. Replace the BiCU. 5. Replace the harness (FFC)

← Xem tất cả mã lỗi Ricoh D219 MPC306ZSP GR-C2

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie