Description: White level detection error The white peak level cannot be in the prescribed value when adjusting the scanner gain. This SC is detected when the scanner power is turned on and the machine returns from the energy saver mode.
Remedy: 1. Check if the SC occurs by turning the power off then on. If the SC occurs again, do the following steps. Check if the SC reoccurs by cycling the power after each step. 2. Reconnect the following connector. SBU-BiCU harness (FFC) connector SBU-LEDB harness (FFC) connector (SBU) 3. Check the white plate (Exposure glass) Replace the exposure glass, if dirty or damaged. 4. Replace the scanner carriage. 5. Replace the BiCU. 6. Replace the harness (FFC).