Code: 682
Description: TD sensor communication error TD sensor cannot be recovered after retrying three times for an ID chip communication error. • If the last digit of the SC’s branch number (-**) is: 1 or 6, then do the above steps for K 2 or 7, then do the above steps for M 3 or 8, then do the above steps for C 4 or 9, then do the above steps for Y
Causes: • Corrupted ID data • Disconnected ID chip • No ID chip • Noise
Remedy: Turn the main power off, and then do the following. 1. Remove the PCU and check the connector condition. 2. Re-insert the harness (BiCU side) between the BiCU and the TD sensor. 3. Replace the PCDU (if the TD sensor works incorrectly) 4. Replace the harness between the BiCU and the TD sensor. 5. Replace the BiCU. Check the SC’s branch number (-** part) and do the above steps for the corresponding color