Code: SC385
Description: ID sensor VSG adjustment error - Timing - During process control self check, the main control board detects that the signal of Vsg fed-back from the ID sensor is out of range.
Causes: • Dirty ID sensor • Poor connection of connector • Defective ID sensor • Poor cleaning
Remedy: 1. Clean the ID sensor. 2. Check if the sensor connector is properly connected. 3. Replace the ID sensor. 4. Check the drum cleaning unit. [ Signal Check ] • ID sensor LED: CN216-B7 or TP103 on I/O control board • ID sensor 1 (K ): CN216-B8 or TP188 on I/O control board / TP115 on main control board. • ID sensor 2 ( CMY): CN216-B9 or TP187 on I/O control board / TP114 on main control board.