Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 202-03 — Ricoh D236 MPC306 GR-C2

Code: 202-03

Description: Polygon motor error 1: ON timeout: Ma, Ye. Polygon mirror motor cannot rotate correctly. This SC is detected when the polygon mirror motor starts rotating, or its rotating speed is changed.
Causes: • Polygon mirror motor failure • Defective motor driver • Polygon mirror motor harness is defective, disconnected, or short-circuited • BiCU failure (Incorrect polygon motor control signal, damaged Laser ASIC) • Defective PSU or power supply part for polygon motor • Fuse blown out • Incorrect AC voltage
Remedy: 1. Cycle the power OFF/ON. 2. Check the harness between LD unit and BiCU. 3. Check CN300 (a connector with five pins) for the polygon mirror motor from the PSU. There is no problem if your multimeter indicates 24±2V. 4. Replace the LD unit (Polygon mirror motor). 5. Replace the harness between the LD unit and BiCU. 6. Replace the BiCU. 7. Replace the fuse. 8. Replace the PSU.

← Xem tất cả mã lỗi Ricoh D236 MPC306 GR-C2

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie