Code: 204-01
Description: Polygon motor error 0: XSCRDY signal error: Bk, Cy. Polygon mirror motor cannot rotate correctly. This SC is detected when the polygon mirror motor is deactivated.
Causes: • Polygon mirror motor failure • Defective motor driver • Polygon mirror motor harness is defective, disconnected, or short-circuited • BiCU failure (Incorrect polygon motor control signal, damaged Laser ASIC) • Defective PSU or power supply part for polygon motor • Fuse blown out
Remedy: 1. Cycle the power OFF/ON. 2. Check the harness between LD unit and BiCU. 3. Check CN300 (a connector with five pins) for the polygon mirror motor from the PSU. *There is no problem if your multi meter indicates 24±2V. 4. Replace the LD unit (Polygon mirror motor). 5. Replace the harness between the LD unit and BiCU. 6. Replace the BiCU. 7. Replace the fuse. 8. Replace the PSU.