Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 240-01 — Ricoh D236 MPC306 GR-C2

Code: 240-01

Description: • The LD current is more than the prescribed current during emitting light. • LD driver cannot be initialized correctly. • Disconnected LDB harness. This SC is detected when: • The machine starts up. • The machine is copying.
Causes: • LDB harness connection error • Deteriorated LD (LD broken) • LDB (LD driver) failure • LDB harness failure
Remedy: 1. Cycle the power off/on. 2. Check the harness between LDB and IPU. 3. Replace the LD unit. 4. Replace the harness between LDB and BiCU.

← Xem tất cả mã lỗi Ricoh D236 MPC306 GR-C2

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie