Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 442-00 — Ricoh D236 MPC306 GR-C2

Code: 442-00

Description: Image transfer belt contact motor error ITB contact HP sensor cannot detect the sensor feeler condition within a specified time even when the ITB contact motor rotates. • Contact/Release: 5000 msec • Homing: 10000 msec • Sampling interval: 10 msec
Causes: • Broken harness or defective connectors • Disconnected connector of image transfer belt contact sensor or motor • Defective image transfer belt contact motor • Image transfer belt unit not installed
Remedy: 1. Set the ITB unit firmly. 2. Replace the ITB unit. 3. Clean the ITB contact HP sensor. 4. Check the harnesses. 5. Replace the ITB contact HP sensor. 6. Replace the ITB contact motor.

← Xem tất cả mã lỗi Ricoh D236 MPC306 GR-C2

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie