Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 492-00 — Ricoh D236 MPC306 GR-C2

Code: 492-00

Description: High voltage power: Transfer bias output error Incorrect PWM signal is detected for 200ms.
Causes: Hardware related causes: • Contact failure • Loose connector (Controller side) • Grounding, open-circuit in the high voltage route • Shorted harness (Controller side) • BiCU malfunction (Signal error) • Power pack (Transfer) failure Load related causes: • Increased impedance in the paper transfer roller • Increased impedance in the ITB • Open-circuit • Transfer unit not installed firmly
Remedy: • This is a logging SC (No action required).

← Xem tất cả mã lỗi Ricoh D236 MPC306 GR-C2

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie