Code: 503-00
Description: 3rd paper tray lift motor malfunction (optional paper feed unit) When the tray is lifted up, the tray lift motor error, or sensor error is detected.
Causes: • Tray Lift Motor disconnection or loose harness • Tray Bottom Plate Pressure Sensor disconnection or loose harness • Tray Bottom Plate HP Sensor disconnection or loose harness • Other defective mechanical parts
Remedy: Do the following steps. Cycle the power off/on after doing each step to check if the SC occurs. 1. Reconnect the connector of the Tray Bottom Plate HP Sensor. 2. Reconnect the connector of the Tray Bottom Plate Pressure Sensor. 3. Replace the Lift Lever Encoder, gear encoder for tray lift unit (‘rising unit’ in the parts catalog), and the tension spring for paper feed. 4. Replace the tray lift motor. 5. Replace the harness. 6. Replace the board in the tray.