Description: Fusing thermopile reload error • The heating roller temperature does not reach a temperature of 80 degrees C within the prescribed time. • The center temperature of the heating roller does not reach the target reload permit temperature within the prescribed time. • The center temperature of the heating roller does not reach the target temperature after starting the heater control in warm up with low temperature.
Causes: • Dirty or defective thermopile lenses • Defective thermistor • Input voltage out of specification (out of warranty)
Remedy: 1. Check and clean the thermopile lenses. 2. Check that the fusing thermopile is firmly connected. 3. Replace the thermopile.