Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 622-00 — Ricoh D236 MPC306 GR-C2

Code: 622-00

Description: Paper tray unit communication error While the BiCU communicates with an optional unit, an SC code is displayed if one of following conditions occurs. • The IPU receives the break signal which is generated by the peripherals only just after the main switch is turned on. • When the BCU does not receive an OK signal from a peripheral 100ms after sending a command to it. The IPU resends the command. The IPU does not receive an OK signal after sending the command 3 times.
Causes: • Cable problems • BiCU problems • PSU problems in the machine • Main board problems in the peripherals
Remedy: • Replace the controller board for the 1st paper feed tray. • Replace the BiCU. • Replace the IOB. • Set the harness between the mainframe and 1st paper feed tray again.

← Xem tất cả mã lỗi Ricoh D236 MPC306 GR-C2

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie