Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 121-00 — Ricoh D245 MP2014 Bc-C1

Code: 121-00

Description: Scanner home position error 2
Causes: • The scanner home position sensor does not go ON even if the scanner moves 480 mm (from the sensor off area) or 30 mm (from the sensor on position) at homing. • The scanner home position sensor goes OFF on starting the DF scanning/Book scanning. • The scanner home position sensor does not go ON when the scanner reaches to the specified position (in the sensor ON area) from the scanning position • This SC is issued only when the error signal of the scanner HP sensor is detected three times consecutively to prevent the sensor detection error due to some noise. • Motor driver defective • Motor defective • Scanner HP sensor defective • Harness defective • Timing belt, pulley, wire, or carriage not installed correctly
Remedy: 1. Perform the following operations. • Check the harness. • Check the timing belt, pulley, wire, or carriage installation. 2. Replace the following parts. • Replace the scanner motor. • Replace the scanner HP sensor.

← Xem tất cả mã lỗi Ricoh D245 MP2014 Bc-C1

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie