Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi SC720-75 — Ricoh D249 MP2554 Cor-C1

Code: SC720-75

Description: Reverse Roller Rocking Motor Error (2K/3K sheet finisher) • Motor driver detects an error (DC motor control error) (1st time is jam notification, 2nd time is SC notification) *SC720-75, 78 only. • During movement to home, the home position could not be detected within a predetermined time (1st time is jam notification, 2nd time is SC notification). • During movement from home, the home position was detected for longer than a predetermined time (t1sec) (1st time is jam notification, 2nd time is SC notification). The time to return to home without fail, the time coming from home, and the time for which the encoder output can be counted during normal operation, are taken as t0, t1 and t2.
Causes: • Motor defective • Connector disconnected • Overload • Home position sensor defective
Remedy: • Check the motor • Check the home position sensor connection • Replace the motor • Replace the home position sensor • Replace the main board of the finisher

← Xem tất cả mã lỗi Ricoh D249 MP2554 Cor-C1

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie