Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi SC440-00 — Ricoh D250 MP3054 Cor-C1

Code: SC440-00

Description: High Voltage Power Source: Paper Transfer : Output Error The machine detects the error detection signal “L (unexpected)” 10 times for 200 msec consecutively when monitoring the error signal every 20 msec during outputting the PWM signal.
Causes: Hardware error • Input / Output connector is disconnected. • Input / Output harness is short-circuited. • IOB error (signal error) • HVPS defective Load error • Transfer roller's impedance increases. • Transfer unit is not set properly.
Remedy: • Cycle the main power off/on. • Reconnect or replace the harness of the HVPS (power pack). • Reconnect or replace the harness between the BCU and the HVPS. • Rset or replacee the transfer unit. • Check if the contact and separation movement of the transfer unit works correctly. • Replace the HVPS. • Replace the BCU.

← Xem tất cả mã lỗi Ricoh D250 MP3054 Cor-C1

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie