Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi SC721-53 — Ricoh D250 MP3054 Cor-C1

Code: SC721-53

Description: Trailing Edge Stopper Motor Error (1K sheet finisher) • During movement to home, the home position could not be detected within a predetermined pulse (p0 pulse) (1st time is jam notification, 2nd time is SC notification). • During movement from home, the home position was detected for longer than a predetermined pulse (p1 pulse) (1st time is jam notification, 2nd time is SC notification). The return pulse to home and pulse coming from home during normal operation are calculated and measured. The pulses which are 1.5-2 times the normal operation pulse are taken as p0 and p1.
Causes: • Motor defective • Connector disconnected • Overload • HP sensor defective
Remedy: • Replace the trailing edge stopper motor • Reset the connector • Replace the trailing edge stopper HP sensor • Replace the harness • Replace the main board of the finisher

← Xem tất cả mã lỗi Ricoh D250 MP3054 Cor-C1

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie