Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi SC505-43 — Ricoh D251 MP3354 Cor-C1

Code: SC505-43

Description: Side LCIT Paper Overload Error (D696) During tray initialization, both the upper limit and lower limit are detected for 3 times consecutively. (The message of resetting the tray is displayed when the both sensors detect the error consecutively 2 times or less.)
Causes: • Paper overload • Paper set fault • Limit sensor error/connector missing • Lower limit sensor error/connector missing • Harness broken • Bank control board defective • Foreign matter, such as paper scrap, is caught inside the tray
Remedy: • Reset the paper. • Remove the foreign matter. • Reset the connector. • Replace the harness. • Replace the sensor. • Replace the control board for the optional side LCT.

← Xem tất cả mã lỗi Ricoh D251 MP3354 Cor-C1

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie