Code: SC212
Description: Master cut error The master edge sensor remains on after the first master cut recovery operation. (Normally, the master is cut if the master edge sensor detects a mis-cut master the first time.) The master edge sensor remains on after the machine detects SC300 (main motor lock) during master wrapping. Normally, the cutter operates if the machine detects SC300 (Main motor lock) during wrapping a master on drum, also after the master edge sensor is still ON when the drum turns to HP again. The cutter HP switch does not turn on within 3 seconds after starting the cutter motor, and the master edge sensor remains on when the drum turns to HP after the cutter motor turns in the opposite direction and returns to HP.
Causes: • Defective master edge sensor • Defective cutter unit • Defective master vacuum fans • Jammed master