Code: 501
Description: 1st tray lift malfunction Paper height sensor does not activate after the tray lift motor is on for 10 s. If the main power switch is turned on when the paper is already at feed height, the paper height position is detected again, and the paper height sensor should deactivate within 5 s after the paper bottom plate starts to drop. If it does not deactivate within 5 s after 4 consecutive attempts, a message prompts the user to reset Tray 1. After two attempts to release the error by re-setting the paper tray, then this SC is issued.
Causes: • Lift motor malfunction or disconnected • Height sensor abnormal, or connector loose • Loose paper or object between the tray and motor • Pick-up arm malfunction