Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi SC 729 — Ricoh G080 CL7000 J-P2

Code: SC 729

Description: Finisher punch motor error The punch home position is not detected within 250 ms after the punch clutch turns on.
Causes: • Loose connection • Defective punch H.P. sensor • Defective punch clutch • Defective punch hole motor
Remedy: 1. Turn the main switch off and on. 2. Check if the connectors of sensor, clutch and/or motor are properly connected. 3. Replace the punch H.P. sensor. 4. Replace the punch clutch. 5. Replace the punch hole motor.

← Xem tất cả mã lỗi Ricoh G080 CL7000 J-P2

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie