Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi SC621 — Ricoh G082 AP3850C J-P1c

Code: SC621

Description: Finisher/mailb ox communicatio n error While the BCU communicates with an optional unit, an SC code is displayed if one of following conditions occurs. 1. The BCU receives a signal which is generated by the peripherals only just after the main switch is turned on. 2. When the BCU does not receive an OK signal from a peripheral 100ms after sending a command to it. The BCU resends the command. The BCU does not receive an OK signal after sending the command 3 times.
Causes: • Cable problems • BCU problems • PSU problems in the machine • Main board problems in the peripherals
Remedy: 1. Turn the main switch off and on. 2. Check if the cables of peripherals are properly connected. 3. Replace the PSU if no power is supplied to peripherals. 4. Replace the BCU or main board of peripherals.

← Xem tất cả mã lỗi Ricoh G082 AP3850C J-P1c

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie