Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi SC 810 — Ricoh G130 CL7200 J-P4

Code: SC 810

Description: Video input incomplete (B) • The scanner is requested to transfer video data, but does not issue the video transmission end command within the defined time.
Causes: • Board connector between controller and bridge board loose • Board connector between bridge board and IPU loose • IPU board defective • Controller board defective • Bridge board defective
Remedy: 1. Turn the main switch off and on. 2. Check the cable connection between controller and bridge board. 3. Check the cable connection between bridge board and IPU. 4. Replace the IPU board. 5. Replace the controller board. 6. Replace the bridge board.

← Xem tất cả mã lỗi Ricoh G130 CL7200 J-P4

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie