Code: 730
Description: Finisher stapler positioning motor error
After the stapler motor turned on, the stapler did not return to its home position within 5357 pulses, or the stapler HP sensor does not activate within 5357 pulses after the stapler motor turned on.
After the stapler motor turned on, the stapler did not return to its home position within 5357 pulses, or the stapler HP sensor does not activate within 5357 pulses after the stapler motor turned on.
Causes: • Stapler positioning motor connector or harness loose, broken, defective • Stapler positioning motor defective or overloaded due to an obstruction • Stapler HP sensor connector or harness loose, broken, defective • Stapler HP sensor defective