Code: 441
Description: Development motor lock
The development motor lock signal remains high for 2 seconds while the development motor is on. If this SC is returned on a machine in the field, inspect the toner supply unit coil. If the gear is not damaged replace the coil. If the gear is damaged, the gear shaft is probably deformed, so replace the entire unit.
The development motor lock signal remains high for 2 seconds while the development motor is on. If this SC is returned on a machine in the field, inspect the toner supply unit coil. If the gear is not damaged replace the coil. If the gear is damaged, the gear shaft is probably deformed, so replace the entire unit.
Causes: • Drive mechanism overloaded due to toner clumping in the wasted toner path • Motor driver board defective