Code: 861
Description: HDD re-try failure
At power on the HDD was detected. Power supply to the HDD was interrupted after the system entered the energy save mode, but after the HDD was awakened from the energy save mode it did not return to the ready status within 30 sec.
At power on the HDD was detected. Power supply to the HDD was interrupted after the system entered the energy save mode, but after the HDD was awakened from the energy save mode it did not return to the ready status within 30 sec.
Causes: Harness between HDD and controller board disconnected, defective. HDD power connector disconnected. HDD defective. Controller board defective.
Remedy: 1. Turn the machine power Off and On. 2. Connect the HDD and the Controller board properly. 3. Connect the HDD power connector. 4. Replace the HDD. 5. Replace the controller board.