Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 440 — Ricoh M054 SP5210SR

Code: 440

Description: Transfer roller leak error 1 A transfer roller current leak signal wad detected higher or lower than 50% for 200 ms. (The current feedback signal for the transfer roller was not detected within the correct time.)
Causes: • High voltage supply board set incorrectly or defective • Transfer roller set incorrectly or damaged • Transfer roller set incorrectly
Remedy:

← Xem tất cả mã lỗi Ricoh M054 SP5210SR

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie