Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 552 — Ricoh M066 SPC431DN Z-P1

Code: 552

Description: Heating roller warm-up error 2
The heating roller temperature does not reach the ready temperature while 70 seconds after the heating lamp on.
Causes: • Dirty or defective thermistor (end) • Heating roller fusing lamp broken • Defected thermostat • Defective heating roller fusing lampamp on.
Remedy: 1. Check if the heating roller thermistor (end) is firmly connected. 2. Replace the heating roller thermistor (end). 3. Replace the heating roller fusing lamp.

← Xem tất cả mã lỗi Ricoh M066 SPC431DN Z-P1

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie