Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 721 — Ricoh M078 Aficio Pro C720 AGL-P1

Code: 721

Description: Finisher (B830) jogger motor error The jogger fences move out of the home position but the HP sensor output does not change within the specified number of pulses. The 1st failure causes an original jam message, and the 2nd failure causes this SC code.
Causes: • Jogger HP sensor disconnected, defective • Jogger motor disconnected, defective • Jogger motor overloaded due to obstruction • Finisher main board and jogger motor connection loose, defective • Finisher main board defective
Remedy: 1. Check and remove obstruction to the jogger motor. 2. Check the harness connections. 3. Replace the jogger HP sensor. 4. Replace the jogger motor. 5. Replace the main board of the finisher (B830).

← Xem tất cả mã lỗi Ricoh M078 Aficio Pro C720 AGL-P1

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie