Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 497 — Ricoh M125 SPC831DN

Code: 497

Description: Temperature sensor error
If the output value of the thermal sensor is 0.5 V or lower or 2.8 V or higher, it is judged as a sensor error and the presumptive temperature, 23 °C, is applied. If the thermal sensor is judged to have encountered a sensor error three times consecutively, the machine issues SC497-00, stops using the sensor, and feeds back the presumptive value. * However, if the power is switched off and then back on, the machine resumes its attempt to use the sensor.
Causes: Loose connection/Disconnected connector. Defective sensor.
Remedy: • Clean/Replace the sensor. • Reconnect the connector. • Check the harness

← Xem tất cả mã lỗi Ricoh M125 SPC831DN

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie