Code: 650
Description: Communication error of the remote service modem (1)
Causes: -01 - • In @Remote, a communication-related error (such as that related to dial-up or modem board) occurs, or an error hindering @Remote operation is detected. • Appears only if an error occurs during @Remote operation. • Errors that occur during @Remote installation will not be handled as SCs. Dial-up authentication failed Check the following SPs. • SP5-816-156 (Dial up user name) • SP5-816-517 (Dial up password) -04 - Communication error of the remote service modem (2) • In @Remote, a communication-related error (such as that related to dial-up or modem board) occurs, or an error hindering @Remote operation is detected. • Appears only if an error occurs during @Remote operation. • Errors that occur during @Remote installation will not be handled as SCs. Dial up fails due to an incorrect modem setting. SP5-816-160: Check if the AT command is appropriate, when the SP above is appropriate, it is caused by a software bug. -05 - Communication error of the remote service modem (3) • In @Remote, a communication-related error (such as that related to dial-up or modem board) occurs, or an error hindering @Remote operation is detected. • Appears only if an error occurs during @Remote operation. • Errors that occur during @Remote installation will not be handled as SCs. The supplied voltage is not sufficient (due to a defective communication line or defective connection). No possible solutions, because the line is not supported. -13 - Communication error of the remote service modem (4) • In @Remote, a communication-related error (such as that related to dial-up or modem board) occurs, or an error hindering @Remote operation is detected. • Appears only if an error occurs during @Remote operation. • Errors that occur during @Remote installation will not be handled as SCs. @Remote is configured, but the modem board is not attached. • Install the modem board if it is not installed. • Check correct setting value for modem driver (SP5-816-160, SP5-816-165 to 171, SP5-816-188 and 189). • Replace the modem board. -14 - Communication error of the remote service modem (5) • In @Remote, a communication-related error (such as that related to dial-up or modem board) occurs, or an error hindering @Remote operation is detected. • Appears only if an error occurs during @Remote operation. • Errors that occur during @Remote installation will not be handled as SCs. The modem board is installed even though the setting at @Remote or the wired/wireless LAN is not working normally. • Uninstall the modem board if it is installed. • Check that the wired/wireless LAN is working properly.
Remedy: