Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 504 — Ricoh M132 SP8300DN AL-P2

Code: 504

Description: 4th tray lift malfunction (optional paper feed unit or LCT) For the two-tray paper feed unit: • When the tray lift motor is turned on, the upper limit is not detected within 15 seconds. If this condition occurs three consecutive times, the SC is generated. • When the tray lowers, the tray lift sensor does not go off within 1.5 sec. For the LCT: • After the job is finished, if the end fence is not in the home position (home position sensor ON), the tray lift motor stops. • When the main switch is turned on or when the paper feed unit is set, if the end fence is not in the home position (home position sensor ON), the tray lift motor stops. If this condition occurs three consecutive times, the SC is generated. • If the upper or lower limit is not detected within 8 seconds when the tray lift motor is turned on to lift up or lower the tray. • When the tray lowers, the tray lift sensor does not go off within 1.5 sec.
Causes: For the paper feed unit: • Defective tray lift motor or connector disconnection • Defective lift sensor or connector disconnection For the LCT: • Defective tray lift motor or connector disconnection • Defective lift sensor or connector disconnection
Remedy:

← Xem tất cả mã lỗi Ricoh M132 SP8300DN AL-P2

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie