Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 720-41 — Ricoh M132 SP8300DN AL-P2

Code: 720-41

Description: 3000-Sheet Finisher Error. Stack feed-out motor error • The stack feed-out HP sensor does not detect the home position of the stack feedout belt within the specified number of pulses after the stack feed-out belt has moved to its home position. • The stack feed-out HP sensor does not turn off within the specified number of pulses after the stack feed-out belt has moved from its home position. The 1st detection failure causes a jam error, and the 2nd failure causes this SC code.
Causes: • Stack feed-out motor disconnected, defective • Stack feed-out motor harness is loose or broken • Stack feed-out HP sensor disconnected, defective • Stack feed-out HP sensor harness is loose or broken • Stack feed-out motor overloaded due to obstruction • Defective main board
Remedy:

← Xem tất cả mã lỗi Ricoh M132 SP8300DN AL-P2

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie