Mã lỗi 204 — Ricoh M257 SPC440DN Z-P2
Code:
204
Description: Polygon motor error 3: XSCRDY signal error The polygon ready (SCRDY_N) signal goes HIGH (inactive) while the laser diode is firing.
Causes: • Disconnected or defective harness to polygon motor driver board • Defective polygon motor • Defective polygon motor driver board
Remedy: 1. Check or replace the harness. 2. Replace the laser unit. 3. Replace the controller. 4. Replace the BCU.
← Xem tất cả mã lỗi Ricoh M257 SPC440DN Z-P2