Display: Hardware error. 03130031-2F2B Turn off printer, wait, then turn on again.
Description: LF operation failure (LF operation disabled) A pump duty of 100% has lasted for 200 msec during LF operation.
Remedy: 1. Replace the feed roller encoder sensor. 2. Replace the feed motor. <Supplement> -If the motor could not be run at all or has resulted in an error after moving by a slight distance: A. A mechanical load error may be suspected. B. The motor or drive circuit may be at fault. -If the carriage has run more or less out of control and resulted in an error, the encoder sensor may be at fault. When FU2802 blows out on iPF6300/ 6400 Series -Replace the main controller PCB.