Code: 8A
Description: Paper jam in Tray 1 (T1)
(It is detects by the registration front sensor)
(It is detects by the registration front sensor)
Causes:
Remedy: • Check if the paper is jammed in the tray. If jammed, remove it. • Adjust the paper guide corresponding to the paper size. • Check if too much paper is loaded in the tray. 1 Harness connection failure of registration front sensor PCB ASSY Check the harness connection of the registration front sensor PCB ASSY in the appropriate tray, and reconnect it. 2 Paper feed roller worn out Replace the paper feed roller. 3 Registration front sensor PCB failure Check the sensor performance following the procedure described in "Maintenance mode 32". If any problem occurs, replace the registration front sensor PCB ASSY. 4 Main PCB failure Replace the main PCB ASSY.