Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi E020-0000 — Canon iR Advance 400i

Code: E020-0000

Description: Detection of the toner clog between the Hopper Unit and the Developing Assembly
When the Developing Assembly Toner Sensor (TS2) detected “toner-absent” and the Hopper Toner Sensor (TS1) detected “toner-present”, the Developing Assembly Toner Sensor (TS2) did not detect “toner-present” though the Hopper Motor (M6) rotated by 194 times at intervals of 1.0 second with having turned on the Developing Cylinder Clutch (CL2).
* If paper is being fed, the error occurs after the paper has been delivered.
Remedy: 1. Check the rotation of the Hopper Motor Gear. (If it is rotating, the sensor may not be detecting correctly. In that case, perform the following to supply toner to the Developing Assembly: COPIER > FUNCTION > INSTALL > TONER-S in the Service Mode.)
2. Replace the Developing Assembly.
3. Replace the Hopper Unit.
4. Replace the DC Controller PCB (PCB1).

← Xem tất cả mã lỗi Canon iR Advance 400i

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie