Code: SC738
Description: Finisher shift tray lift motor error
It occurs 2 times consecutively that; 1) The stack height sensor is not activated within 50 seconds after the motor starts lifting the tray. 2) The stack height sensor is still activated 5 seconds after the motor starts lowering the tray.
It occurs 2 times consecutively that; 1) The stack height sensor is not activated within 50 seconds after the motor starts lifting the tray. 2) The stack height sensor is still activated 5 seconds after the motor starts lowering the tray.
Causes: • Stack height sensor defective or poor connection • Shift tray lift motor defective • Finisher main board defective • Too much load on the drive mechanism