Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi E061-0001 — Canon iR Advance 6275i

Code: E061-0001

Description: Potential control error (VL)
The measured value in the dark area (VL) differs +/-30V or higher than the target potential at potential control. NOTE: If the difference is somewhere between +/-10V and less than 30V, alarm is indicated.
Remedy: 1. Check the connection of the Pre-exposure LED (connector connection, open circuit, the caught cable). 2. Check the installation of the Primary Charging Assembly (connector connection, open circuit, the caught cable). 3. Check the fixation state of the Drum and the Drum Shaft. (Check if the drum fixation cylinder is properly installed.) 4. Check if the Dustproof Glass is soiled. If necessary, clean it. 5. Check the installation of the Laser Scanner Unit (connector connection, open circuit, the caught cable). 6. Check the installation of the Primary Charging High Voltage PCB (PCB11), and its connection (connector connection, open circuit, the caught cable). 7. Check the installation of the Potential Sensor (connector connection, open circuit, the caught cable). 8. Check the installation of the Drum Motor (M1), and its connection (connector connection, open circuit, the caught cable). 9. Replace the parts. • Primary Charging Assembly • Laser Scanner Unit • Potential Sensor • Primary Charging High Voltage PCB (PCB11) • Drum Motor (M1) • Main Driver PCB (PCB2) • DC Controller PCB (PCB1)

← Xem tất cả mã lỗi Canon iR Advance 6275i

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie