Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi E748-2010 — Canon iR Advance C250iF

Code: E748-2010

Description: Flash PCB error / HDD error
IPL (startup program) was not found, or the HDD could not be recognized.
Remedy: [Related parts] - Cable between the Main Controller PCB (UN81/J7008 and J7018) and the HDD (Unit of replacement: CABLE, SATA POWER, CABLE, SATA SIGNAL) - Flash PCB (UN96) [Points to note at work] When checking the harness/cable or connector, perform the following work. 1. Disconnect and then connect the connector to check that there is no bent pin and cable disconnection. 2. Visually check that the harness is not caught or open circuit. 3. If there is any error, replace the corresponding harness/cable. [Remedy] Perform the following in the order while checking whether the error is cleared. 1. Disconnect the cable between the Main Controller PCB and the HDD, and turn ON the main power. a. When the error code has not been changed: 1. Obtain the necessary backup data by referring to the backup data list. 2. Enter safe mode using (2+8) startup, and execute [4] Clear/Format> [2] Flash Format (Flash format) using SST or a USB memory. 3. After replacement of the Flash PCB, reinstall the system software using SST or a USB memory. 4. Restore the backup data. b. When the error code has been changed to another one, see the remedy for the corresponding code.

← Xem tất cả mã lỗi Canon iR Advance C250iF

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie