Code: E674-0100
Description: Fax Board communication error
After completion of fax communication, writing of the communication information (log) failed, and the log could not be read.
After completion of fax communication, writing of the communication information (log) failed, and the log could not be read.
Remedy: [Related parts] - HDD (Unit of replacement: HARD DISK DRIVE) - Main Controller PCB (UN81) (Unit of replacement: MAIN CONTROLLER PCB ASSEMBLY) [Remedy] Perform the following in the order while checking whether the error is cleared. 1. Turn OFF and then ON the main power, and check whether the error is cleared. [Caution] By executing “COPIER> FUNCTION> CLEAR> FXTX-CLR”, job logs in “Status Monitor/Cancel> Send> Log> Fax Transmission Completion Log” are cleared. 2. After deleting the system software using USB memory, reinstall it using SST or a USB memory. 3. After replacing the HDD, execute [4] Clear/Format> [1] Disk Format (HDD format) using SST or a USB memory. 4. Replace the Main Controller PCB.