Code: E746-0034
Description: TPM auto recovery error
The error occurred when clearing HDD while TPM setting was ON.
The error occurred when clearing HDD while TPM setting was ON.
Remedy: [Remedy] Perform the following in the order while checking whether the error is cleared. 1. Turn OFF and then ON the main power, and check whether the error is cleared. a. If the error is cleared, execute “Settings/Registration> Log In> Management Settings> Data Management> Initialize All Data/Settings”. b. If the error is not cleared, format the system. 1. Enter safe mode using (2+8) startup, and execute [4] Clear/Format> [2] Flash Format (Flash format) using a USB memory. 2. Reinstall the system software using SST or a USB memory. 2. If the TPM key was backed up, restore the key. 2-1. Connect the USB memory which stores the TPM key. 2-2. Execute “Settings/Registration> Log In> Management Settings> Data Management> TPM Settings> Restore TPM Key”. [Caution] Ask the customer to enter “System Manager ID” and “Password” when logging in. 2-3. Enter the password set at backup operation. 2-4. When the restoration completion screen is displayed, click “OK”. Remove the USB memory, and turn OFF and then ON the main power.