Code: E025-0200
Description: Error in lock of the M Toner Container Motor
The M Toner Container Motor is detected to be locked / lock detection.
The M Toner Container Motor is detected to be locked / lock detection.
Remedy: 1. Use the attached tool to manually rotate the Main Drive Unit to check the operation (by comparing with other color, etc.) If the manual rotating operation results in NG, perform the following because it’s due to mechanical overload. If there is no problem, go to step 5. 2. Remove the Delivery Tray to check the position of the projection attached at the back of the gear in the Hopper Assembly. Compare with the gear that works properly. If the position of the projection is displaced, check the following. Check the lever to open/close the Toner Small Cover (to see if the operation is smooth, no damage with the lever, the lever works OK (no wrong move to up/down). If the lever is faulty, replace the lever. 3. Remove the Main Drive Unit to check the unit (to see damage, etc.) If it’s results in NG, replace the Main Drive Unit. 4. Manually turn the gear on the cam in the hopper unit to check the rotation. If it’s results in NG, replace the Set-on Hopper Unit. 5. (If the above measures do not solve the problem) Replace the Toner Container Motor (M10). Replace the Drum Driver PCB (UN4).