Code: E611-0000
Description: Error code to prevent repeated retransmission at power down during fax transmission
When the power is down during fax transmission, this machine resends the fax at the next power-on. However, the operation (retransmission => rebooting => retransmission) might be repeated due to the damage on SRAM at the power down. To prevent this symptom, this error code is displayed when this operation is repeated in a short term.
When the power is down during fax transmission, this machine resends the fax at the next power-on. However, the operation (retransmission => rebooting => retransmission) might be repeated due to the damage on SRAM at the power down. To prevent this symptom, this error code is displayed when this operation is repeated in a short term.
Remedy: 1. Execute service mode > COPIER> FUNCTION > CLEAR > FXTX-CLR. (This service mode can be used only when the System is ver. 30.30 or later) 2. Turn OFF and then ON the main power switch. [Points to Note When Clearing MN-CON] Execution of clearing MN-COM deletes all data in Address Book, Forwarding Settings, Settings/Registration (Preferences), Adjustment/Maintenance, Function Settings, Set Destination, Management Settings, TPM Settings, etc. Before execution of this operation, ask user to back up the data and get approval for this operation. When clearing MN-CON while any login application other than Default Authentication is, error such as not displayed login screen occurred. In this case, access SMS once and switch login application to Default Authentication to recover to the normal status.