Code: E602-0003
Description: Error in HDD. WriteAbort was detected with BootDevice
Remedy: 1. Execute detection and recovery of WriteAbortSector <In the case of display of B/W E-code> 1-1. Perform the following steps because Service Mode is not available. 1-2. Turn OFF the power. Then, while pressing 1+9 keys, turn ON the power. WriteAbortSector recovery routine is automatically started which makes the screen black. 1-3. After a while, progress is displayed because the process takes time (40 to 50 min.). The process is complete when the screen turns white. <In the case of official display of wrench-mark> 1-1. Set as follows: CHK-TYPE=0; and execute HD-CHECK (40 to 50 min.), and then turn OFF and then ON the main switch. 2. If the above measures do not solve the problem, start up in Safe Mode to perform overall format using SST or USB memory and reinstall the system, and then turn OFF and then ON the main switch. 3. If no improvement is found despite the above measures, it can be caused by failure with HDD; therefore, replace the HDD and reinstall the system.