Code: E013-0001
Description: Waste toner feed screw lock detection error. When the waste toner pipe screw lock SW (SW10) detected the lock status for 500 msec (100 msec x 5 times) consecutively
Remedy: • Pull out the Waste Toner Container. If it is full of toner, go to Step 1, 2, and 5. • If the Waste Toner Container is not full of toner, go to Step 1, 2, and 4. • If the Waste Toner Container is not full and the Waste Toner Pipe is not clogged with toner, go to Step 3 and 4. 1. Remove the toner in the Waste Toner Pipe. 2. Replace the Waste Toner Full Sensor and the Waste Toner Container. 3. Replace the Waste Toner Screw Lock Detection Switch (SW10). 4. Replace the Waste Toner Drive Unit. 5. Reduce the value of timing setting for waste toner full alert display (COPIER> ADJUST> MISC> WT-FL-LM) by 1.