Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi E014-0001 — Canon iR Advance C7270i

Code: E014-0001

Description: Fixing motor error (At start-up). Locking was not released within 3 seconds after the fixing motor was turned on.
Remedy: Because the DC Controller turns OFF the 38 V Power Supply when an error is detected, it is needed to restart and check the power output before the machine detects the error to determine whether the cause of the error is power supply. If there is no power output, power supply is the cause. If there is power output, factor other than power supply can be the cause of the error. 1. Check the fixing unit drive gear -> replace the gear 2. Replace the fixing motor (M48) 3. Replace the pckup feed drive PCB. 4. Check the connection of the 38 V Power Supply connector. 5. Replace the 38 V Power Supply. 6. Replace the DC controller PCB

← Xem tất cả mã lỗi Canon iR Advance C7270i

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie