Code: E013-0003
Description: Waste toner full sensor error. Output of the waste toner full sensor cannot be detected.
Remedy: Supply when an error is detected, it is needed to restart and check the power output before the machine detects the error to determine whether the cause of the error is power supply. If there is no power output, power supply is the cause. If there is power output, factor other than power supply can be the cause of the error. 1. Check the connection between the Waste Toner Full Sensor (TS9) and thePickup feed drive PCB. (Connection of the connector, Breaking (Breaking (shorting)), Wire caught by parts) Sensor side: J8981, PCB side: J898, J1470 2. Check the connection of the 24 V Power Supply connector. 3. Replace the Waste Toner Full Sensor. 4. Replace the 24 V Power Supply.